Rack Guides; Oven Lamp - KitchenAid KEBC149BSS Use & Care Manual

Self-cleaning built-in electric
Hide thumbs Also See for KEBC149BSS:
Table of Contents

Advertisement

Available languages

Available languages

The side accessory holder grills are attached to the oven side
wall with 2 screws (1 on each side).
To remove :
Before removing the side grills, make sure the oven is off and
cool.
1. Using a flat blade screwdriver, remove the screw that
attaches the side grill to the oven side wall.
2. Lift upward and pull out on the bottom to remove the grill.
3. Repeat this procedure to remove the other side grill.
A
I
B
_'-_1
i __
A. Side grill
B. Screw
The oven lamp uses either an incandescent
or halogen lamp. For
replacement
lamps, use only 25-40W/230V
type E, T300°C
incandescent
lamps or 20-40W/230V
type G9, T300°C halogen
lamps.
IMPORTANT: If using a halogen lamp, do not touch the lamp with
bare fingers. Use tissue or wear cotton gloves to handle the lamp
to avoid damage to or decreasing the life of the new lamp.
To Replace:
Before replacing the bulb, make sure the oven is off and cool.
1. Disconnect
power.
2. Remove the lamp cover by turning it counterclockwise.
A. Lamp cover
3. Remove the bulb from the socket.
4. Replace the bulb. If using a halogen bulb, use tissue or wear
cotton gloves to handle the bulb. To avoid damage to or
decreasing the life of the new bulb, do not touch the bulb with
bare fingers.
5. Replace the lamp cover by turning it clockwise.
6. Reconnect power.
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents