Status Indicators - KitchenAid KUDS011L Use & Care Manual

ENERGY SAVER
TM
Dry System
Select this option to dry dishes without heat. ENERGY SAVER
TM
Dry System is useful if you do dishes at night and unload in the
morning.
®
Energy
Sewr
The dishes take longer to dry, and some spotting can occur. For
best drying, always use a liquid rinse aid. Some items (such as
plastics) may need towel drying.
NOTE: Rinse Only automatically uses this option. ENERGY
SAVEF M Dry System is an option with all other cycles.
Control Lock
Use Control Lock to prevent unintended use of the dishwasher.
You can also use the control lock feature to prevent unintended
cycle or option changes during a cycle.
¢_tr_l
b_k
®
When Control Lock is lit, all buttons are disabled.
NOTES:
• The dishwasher door can be opened while the controls are
locked.
• You can turn on the Lock while the dishwasher is running.
To turn on the Lock
Press and hold
®
Isawr I
for 4 seconds. Control Lock glows.
If you press any pad while your dishwasher control is locked, the
light flashes 3 times.
To turn off the Lock
Press and hold ENERGY SAVER
TM
Dry control for 4 seconds. The
light turns off.
Delay Hours
Select this option to run your dishwasher at a later time or during
off-peak hours. You can add items to the load anytime during the
delay countdown. After adding items, close the door firmly until it
latches. The delay countdown will not continue if the door is not
latched.
• You can delay the start of a cycle up to 24 hours.
• The first time you select Delay Hours, you will see
showing a 1-hour delay.
To delay the start
1. Close the door.
2. Select a wash cycle and options.
3. Repeatedly press
©
until you see the desired hours of delay in the display.
When the delay reaches 24 hours, the delay turns off. Press
Delay Hours again to select a new number of delay hours.
NOTE: The delay is set at one-hour increments for the first 12
hours. The remaining delay hours are set at two-hour
increments.
4. Press Start.
NOTE: To cancel the delay, press Delay Hours until no delay
hours show in the display or press Start.
IMPORTANT:
• Operate your dishwasher only when you are at home.
• If your home is equipped with a water softener, do not start
the dishwasher during the regeneration of the softener.
Follow the progress of your dishwasher with the Cycle Status
indicators.
O Add Rinse Aid
Sensing / Soak
Add a Dish
Water Heating
Clean
Sanitized
Add Rinse Aid
Fill the Rinse Aid dispenser when Add Rinse Aid is lit. A rinse aid
prevents water from forming droplets that can dry as spots or
streaks.
If the Rinse Aid dispenser is empty, the light glows when you
select a cycle or while a cycle is running.
Sensing/Soak
Your dishwasher senses the soil level on the dishes. Soil level
determines the length of some cycles, the amount of heat or
water added, and the cycle needed for the load. Soaks help
loosen soils on the dishes.
Sensing/Soak glows during the sensing and soak parts of the
cycle. Wash action continues while sensing occurs. Wash action
pauses during a soak.
Add a Dish
After a cycle starts, you can add an item to your dishwasher while
Add a Dish glows. After the light turns off, items added to the
dishwasher may not be completely cleaned.
Water Heating
Water Heating glows, and the cycle progression pauses,
whenever water is heated to a set temperature during a cycle.
Wash or rinse action continues as the water heats.
16