Download  Print this page

Electrical Hook-Up; Water Fill - Kenmore 758.296140C Operator's Manual

Whole house humidifier 53 litre output with innovative twin fan technology
Hide thumbs

Advertisement

Electrical Hook-Up
Locate
nearest
120V A.C. wall socket
in
the location
desired,
preferably
on inside
wall. With the humidifier
in the desired
location,
route the electrical
cord safely
so no one will trip or upset
the humidifier.
Plug in the electrical
cord.
WARNING:
To reduce
the risk of fire
or shock
hazard,
humidifier
should
be plugged
into a 120V A.C. outlet.
Do not use extension
cords.
To reduce
the risk of electrical
shock,
this
humidifier
has a polarized
plug (one
blade
is wider
than the other). This plug
will fit in a polarized
outlet only one way.
If the plug does not fit fully in the outlet,
reverse
plug. If it still does
not fit, contact
a qualified
electrician
to install the proper
outlet.
Do not change
the plug in any way.
Water Fill
WARNING:
To reduce
the risk of
shock,
always
unplug
humidifier
before
cleaning
or servicing.
WARNING:
To reduce
the risk of fire
or shock
hazard,
do not pour or spill
water
into control
or motor area.
If controls
get wet, let them
dry
completely
and have unit checked
by
authorized
service
personnel
before
plugging
in.
This humidifier
is designed
for use with
the two water
bottles
that are located
under
the pivoting
lid.
Open the pivoting
lid of the humidifier.
Remove
the water
bottles
by lifting them
straight
up and out of the cabinet.
Notice
the water
bottles
are designed
as
right and left hand
units. Position
them
in
the correct
location
so the humidifier
can
function
properly.
The water
bottles
should
rest in the front of the cabinet.
Each "E-Z-Fill
Side-Cap"
must be facing
the rear of the unit.
/
Fan Assembly
. Pivoting
Lid
"E-Z=Fi!l
Side-Cap"
Should
Always
Face Rear

Advertisement

loading

  Related Manuals for Kenmore 758.296140C