Assembly - Kenmore Power-Mate 1162561190 Owner's Manual

ASSEMBLY
Before assembling your vacuum cleaner, be sure you
have all pads shown In PARTS AND FEATURES,
WARNING
Electrical Shock Hazard
Do not plug Into elech_}cal supply unlll assembly Is
complete.. Fallu_e to do so could result In electrical
shock or In}ury.
WANDS
Silde wands together
untl/wand button
snaps Into pface, Turn
wand button to the
slotted area of the
wand swivel
The swivel allows you
to turn the handle 1o
the left side to reach
farther under low
furniture_
Cord
Holder
POWER-MATE
1, Insert wands Into POWER-MATE TM until the wand
buttons snaps into place
2.Connect
POWER-MATE 7M
plug and cord as
shown, DO NOT
force. Ra_sed area
of plug must be
toward hand.
3, Secure cord into
cord holder on
wand swivel
To remove:
Disconnect cord
and step on wand
release pedal,
then puit up on
wands
i -- Wand
Swivel
W_nd
j Bu_