Table of Contents
Advertisement
REMOVING
BLADE AND
BLADE GUARD FROM SAW
1.
Loosen blade guard clamp knob (A)Fig. 11, and
rotate blade guard (B) to the position shown.
2.
With wrenches (C) Fig. 12, loosen arbor nut (D) as
much as possible.
NOTE: Arbor
nut
has left hand
threads.
3.
Lift cam (E) Fig. 13, which holds the blade guard (B)
Fig. 12, in position and move the blade guard (B), outer
blade flange (F), and blade (G) outward.
4.
Lift blade guard (B) Fig. 14, and remove arbor nut
(D), outer blade flange (F), and blade (G). Then remove
blade guard (B).
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Page 14
Advertisement
Table of Contents
