Control Knobs; Oven Light Bulb - Kenmore 911.45461 Owner's Manual

CARE ANDCLEA#IN8
RemovableParts
CLEANING MATERIALS
,, Dishwashing detergent
o Warm water
,, Soft cloth
Molded Rib
__ J Clear
li I/!/ Groovein
2R:: s,o,,,
Spring Clip
TO REMOVE
1, Be sure the control knob is in the
off position.
2, Pull straight off the stem,
Using a piece of string can make
removing the knob easier Slip the
string under and around the knob,
pulling straight out.
TO CLEAN
Wash the knob thoroughly with soapy
water. Dry completely with a soft cloth
DO NOT let the knob soak
TO REPLACE
1, Check the back of the knob. The
molded rib of the knob is designed
to fit perfectly onto the knob stem
2. Align the molded rib to the clear
groove in the knob stem
3, Push the knob back as far as it
will go.
21
!F_ ,,,....................... L ,, ,_,,,J,L,L,L__II
__ AUTION:
Disconnect
electrical power to
the oven at the
main circuit breaker or fuse
box before attempting to
replace the oven light bulb.
Do not touch a hot light bulb
with wet hands or a wet
cloth, Wait until the bulb has
cooled and use a dry cloth,
Glass Retainer
Live
Bulb
TO REMOVE THE COVER
1, Disconnect electrical power to the
oven at the main circuit breaker or
fuse box
2, Grasp the glass cover and turn 1/4
turn counterclockwise until the tabs
of the glass cover clear the
grooves of the glass retainer
REPLACE THE LIGHT BULB
Unscrew the light bulb and replace it
with a 40-watt appliance bulb
TO REPLACE COVER
1, Place the tabs of the glass cover
into the grooves of the glass
retainer
2, Turn the glass cover I/4 turn in the
clockwise direction
3. Reconnect the electrical power to
the oven
For improved lighting inside the oven,
clean the glass cover frequently using
a wet cloth Caution: This should
only be done when the oven is
completely cool.