Download Print this page

Kenmore 116.34725 Owner's Manual page 9

Hide thumbs

Advertisement

The attached
hose swivels to
make cleaning
easier in every
direction.
Swivel
Remove the
hose from the
hose clip by
pulling
straight out.
TELESCOPING WAND WITH
SUCTION CONTROL SLIDE
SOME MODELS
Remove the
Crevice
telescoping
Tool
wand from
its storage
Telescoping
position.
Wand
Remove the crevice tool from its storage
position in the wand. Turn the locking ring to
the UNLOCK
position.
Extend the wand to its full length. Turn the
locking ring to the LOCK position. Attach the
extension
wand onto the open end of the
hose.
Lower_
Suction
Wand __h_
Control Slide
(
Wend
\
oe.ing.ing I--
_Unlock
_/-_
Upper
Wand
Align the tabs on the extension
wand with
the "J" slots in the hose. Push the wand into
the hose and twist to the right to lock.
To achieve maximum reach
with the attachments,
Hose
add the crevice tool to
the end of the
Suction
wand by inserting Control
and twisting
Telescoping
Wand
Tool
The dusting
brush or the
combination
r
brush may be
attached
directly to the
wand or
placed on the
end of the crevice tool.
TO OPERATE SUCTION
CONTROL SLIDE
Telescoping Wand
When using attachments
for cleaning
draperies,
small rugs with low pile and other
delicate items, twist the suction control slide
to the open position. This will reduce suction
for ease of cleaning.
Suction
Control
The slide is
Slide
located on the
telescoping wand,
close to the hose.
Note: Return suction control slide to the
closed position for normal cleaning.
When using attachments, be careful not
to overextendthe stretch hose when
reaching. Trying to roach beyond the
hose stretchcapability could cause the
cleaner to tip over. Make sure the car-
bet/bare floor selector is In the bare floor
position. Damage to the floor surface
may occur ff the carpet setting Is used.
9

Advertisement

loading

  Related Manuals for Kenmore 116.34725

This manual is also suitable for:

116.34726