Releasing The Handle; On/Off Switch; Handle Mounted; Attachments - Kenmore 116.34725 Owner's Manual

Release the handle by pressing down on
the handle release pedal with your foot and
pulling back and down on the handle with
your hand.
Release
Pedal
HANDLE MOUNTED
To start the vacuum cleaner, slide the
On/Off switchfrom the OFF positionto the
ON position.To stop the vacuum cleaner,
slide the On/Off switchto the OFF position,
Crevice Remove the lower end of the stretch hose
Telescopln!
Dusting
Combination
Stretch
Hose
Identify each ofthe a_achments shown
above.
TO USE ATTACHMENTS
Place the carpet/bare floor selector in the
bare floor setting by rotating the selector
back and down to the bare floor setting.
See CARPET/BARE FLOOR SELECTOR
section.
When returning the bare floor selector to
the carpet setting, use caution as the selec-
tor can move quickly to that setting due to
tension created by the belt.
from the cleaner by grasping the hose col-
lar, twisting and pulling straight out. The
attachments can now be added to the hose.
Note: The motor protector may open
when using attachments or when cleaning
new carpet, due to reduced airflow by the
attachments themselves or by new carpet
fuzz filling the dust bin quickly. See the
TROUBLESHOOTING section.
ElectricaJ Shock And Personal Injury
Hazard
Disconnect electricalsupply before
servicingor cleaning the unit. Failure
to do so could result in electrical shook
or personal Injuryfrom cleaner sud-
denly starting.