Tools Required For Assembly - Kenmore 141.16734 Operator's Manual

Before attempting to assemble Side Shelf with Bracket, Drain Basket Kit and Cart Handle with Brackets to your
Seving Cart check that all the necessary parts and hardware has been included and inspect parts for damage as you
proceed. Contact the Customer Support Help Line regarding replacement of any missing or damaged parts.
Tools Required for Assembly
not included in Hardware Pack are:
• Protective work gloves
• Phillips Head Screwdriver
• Ajustable Wrench
Install Casters on Bottom Cart
[] Place the Cart Bottom Panel upside down
on the cardboard work surface, bottom side
facing up. Install the Casters onto the four
corners.
Phillips Head Screw 1/4"xl/2"
Qty. 12
Part # $122G04081
H Install Rear and Side Cart Panels
[] Install the Left/Right Side Cart Panels and Cart
Rear Panel onto Cart Bottom Shelf•
Phillips Head Screw 1/4"x3/8"
Qty. 8
Part # S122G04061
H onnect the Rear Cart Panel to Side Panels
[] Connect the Rear Cart Panel to Side panels and
tighten securely to the Side Panel
\\
\\
\\
\\
\\
\\
\\
_q
Phillips Head Screw 1/4"x3/8"
Qty. 6
Part # S122G04061
Flange Nut 1/4"
Qty. 6
Part # S313G04061