Materials And Basic Tools Needed; Materials Needed; Basic Tools - Kenmore 153.317232 Owner's Manual

Materials and Basic Tools Needed
Materials Needed
To simplify the installation Sears has available the installation
parts shown below. You may or may not need all of these materi-
als, depending on your type of installation.
E_t_ l
Water Heater
Inslallstlon
II __ IiI _ 28" DIAMETER DRAIN PAN FOR
I_ WATER HEATERS 26" IN
DIAMETER AND UNDER
EXPANSION TANKS FOR THERMAL f/ \
EXPANSION CONDITIONS AVAIL-
WATER HEATER INSTALLA-
TION KIT WITH FLEXIBLE
CONNECTORS FOR 3/4" OR
I/2 °' THREADED OR COPPER
PLUMBING
ABLE IN 2 GALLON AND S GALLON
CAPACITY THROUGH LOCAL
SEARS SERVICE CENTERS
20" DIAMETER DRAIN PAN
FOR WATER HEATERS I E" IN
DIAMETER AND UNDER
Basic Tools
You may or may not need all of these tools, depending on y_ o ur
type of installation. These tools can be purchased at your local
Sears store.
• Pipe Wrench (2) 14"
• Screwdriver
• 6 Foot Tape or Folding Rule
• Garden Hose
• Drill
• Pipe Dope or Teflon Tape
6 FOOT TAPE
GARDEN HOSE
SLOT-HEAD SCREWDRIVER
PHILLIPS SCREWDRIVER
PIPE DOPE (SQUEEZE TUBE)
PIPE
WRENCH
roll of teflon tape
(Use only on water connections)
DRILL
ADDITIONAL TOOLS NEEDED WHEN
SWEAT SOLDERING
• Tubing Cutters or Hacksaw
• Propane Torch
• Soft Solder
• Solder Flux
• Emery Cloth
• Wire Brushes
HACKSAW
3/4" WIRE BRUSH
112" WIRE BRUSH
PROPANE TORCH
ROLL OF LEAD FREE
SOFT SOLDER
ROLL OF EMERY SOLDER TUBING
CLOTH FLUX CUTTER