Removable External Doorglass Panel; Porcelain Enamel Oven Cleaning - Kenmore 790.4525 Series Use & Care Manual

Drop-in models
Table of Contents

Advertisement

Genera
Care & CReaning
Removable
E×terna_ Door G_ass Pane_
AppHcabb onUyto modeb with an extemaU gUasspaneUnot heUdwith a frame, This design allows you to clean the inside
face of the exterior door paneUas well as the hidden face of the door inner gUass,
To Remove the E×temal Door Glass Panel:
1, Remove the door as expUained above and Uaythe door flat,
2, Using a screwdriver, remove the 5 screws fastening,
3, Grasp both sides of the gUasspaneUand sbwUy pull it out of the door upper moUding, Lay the gUassfiat,
To Replace the ExtemaJ Door GJaee Panel:
1, Grasp the sides of the glass panel and carefully insert the glass into the door top moulding,
2, Replace the 5 locking screws,
3, Replace the dooronto the range,
Handle the glass panel with care, When dropped on a corner, the glass panel may shatter, This can
cause several personal injury,
Porcelain
Ename_
Oven
C_eaning
Porcelain has a smooth finish and is a type of glass fused to metal, Oven cleaners can be
used on all interior oven surfaces,
General CJeaning
Remove soils using hot, soapy water, Do not allow food spills with a high sugar or acid
content (such as milk, tomatoes, saukerkraut, fruit juices or pie filling) to remain on the
surface as they may cause a dull spot even after cleaning,
To Remove Heavy Soil
1,
Allow a dish of ammonia to sit in the oven overnight or for several hours with the oven
door closed,
Clean softened spots using hot, soapy water, Rinse well with water and a
clean cloth,
2,
If soil remains, use a soap-filbd scouring pad or a nonabrasive cleaner, If necessary,
use an oven cleaner following manufacturer's
instructions, DO NOT mix ammonia with
othercbaners,
Adhere to the following
precautions
when using oven cJeanere:
1,
DO NOT spray on the electrical controls or switches because it could cause a short
circuit and result in sparking or fire,
2,
DO NOT allow a film from the cleaner to build up on the temperature sensing bulb
located at the top left rear corner of the oven; it could cause the oven to heat
improperly, Carefully wipe the bulb clean after each oven cleaning, being careful not to
move the bulb, A change in its position could affect how the oven bakes, Avoid bending
the bulb and capillary tube,
3,
DO NOT spray any cleaner on the oven door trim or gasket, handles or any exterior
surfaces of the range, wood or painted surfaces, The cleaner can damage these
surfaces,
Adhere to the
following
cleaning
precautions:
o Allow the oven to
cool before cleaning,
o Wear rubbergloves
appliance manually,
Remove epiHovere and
heavy soils as soon as
possible.
Regular
cJeaninge will reduce
the number of future
major cteaninge.
Ammonia
must be rinsed before
operating the oven,
Provide adequate
ventilation,
To Clean the Oven Bottom
The bake element is designed to be gently tilted using your hand from the front of the bake element, This allow easier
access to the oven bottom for cleaning, Be careful not to raise the element more than 4 or 5 inches from the resting
position,
Clean using hot, soapy water, a mild abrasive cleanser, a soap°filled abrasive pad or oven cleaner following oven cleaner
manufacturer's instructions,
DO NOT line the oven walls, bottom, racks or any other part of the appliance with aluminum foil, Doing so
wiii destroy heat distribution, produce poor baking results and cause permanent damage to the oven interior (aluminum foil
will melt to the interior surface of the oven),
17

Advertisement

Table of Contents
loading

Table of Contents