Threading The Machine; Drawing Up Bobbin Thread - Kenmore 385.12318 Owner's Manual

Table of Contents

Advertisement

Threading
the Machine
• Threading
the machine
*
Raise the thread take-up lever to its highest position
by turning the handwheel counterclockwise,
toward
you.
"
Raise the presser foot lifter,r
*
Place a spool on the spool pin, with thread coming
off as shown_
[]
Draw the end of thread around the upper thread guide.
[]
While holding the thread near the spool, draw the
end of the thread down around the check spring
holder,,
[]
Firmly draw the thread up from right to left over
the take-up lever and down into the take-up lever
eye.
[]
Slide the thread behind the needle bar thread
guide on the left..
[]
Thread the needle from front to back or use a
needle threader.
We recommend
using the convenient needle
threader (#200262101),
included with your
machine..
J
o Drawing up bobbin thread
[]
Raise the presser foot. Hold the needle thread
lightly with your left hand and rotate the handwheel
counterclockwise,
toward you, for one complete turn.
[]
Bring the bobbin thread up by pulling the needle
thread up.
[]
Pull both threads under and to the back of the
presser foot, leaving 4" to 6" (lOcm to 15cm)
of thread clear.
[]
[]
[]
24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents