Advertisement
Side Shelf
and Side Burner
Attachment
1.
Loosen
the bolts on the side of'the
grill and
attach
the shell" by allowing
the bolt heads
to
fall through
the large opening
in the bottom
of"
the keyhole
slots.
Then
slide the shelves
downward
until the bolts
are resting
against
the top of'the
key hole slots. Tighten
all of"
the shell" bolts. (See Fig. 5)
.
Attach
the wires
coming
out from the sides of
the grill to the ignitor
terminals.
(See Fig. 6)
Note:
It does not matter
which
wire goes to which
terminal
on the double
wire ignitor
.
.
.
Note:
Attach the side burner by allowing the bolt
heads to fall through the large opening in the
bottom of the keyhole slots. Then slide the
sine burner aownwara
until me
boltS
are
resting against the top of the key hole slots.
Tighten all of the side burner bolts.
Screw
the Flex Line coming
from the side of
the grill to the fitting
on the bottom
of the
Side Burner.
(See Fig. 7)
Attach the ignitor wires coming out from the
side of the grill to ignitor terminals.
(See Fig. 8)
It does not matter
which
wire goes to which
terminal
on the three
wire ignitor
.
Install burner into side burner tray lining up
the three cutouts on the underside of the
burner. (See Fig. 9)
5.
Install burner cap onto burner (See Fig. 10)
Fig. 5
Fig. 6
Fig. 7
Fig. 8
wires
hookup
Fig. 10
Fig. 9
Advertisement
