Table of Contents
Advertisement
SAFETY INSTRUCTIONS
Control, maintenance
and service of
the hedge trimmer's
protective
equipment
IMPORTANT INFORMATION
All service and repairs to the machine require
special training.
This applies especially to the machine's safety
equipment. If the machine does not meet any of
he controls listed below you should contact
your service workshop.
The purchase of one of our products
guarantees that professional
repair and
servicing will be carried out on it. If the point of
purchase is not one of our servicing dealers,
please ask for details of the closest service
workshop.
1. Throttle
trigger lock
Check that the throttle is
locked in the "idling
position"
when the
throttle
trigger lock is in
its original position.
•
Press
in the throttle
trigger lock and make
sure it returns to its
original position when
released.
• Ensure that the throttle
and throttle trigger lock
move easily and that their
return spring systems
function.
• See the section "&ar['.
Start the hedge trimmer
and apply full throttle,
f
Release the throttle and
check ttlat the blades
stop and remain at a
standstill.
If the blades
rotate with the throttle in
the idling position then
the carburettor's
idling
setting must be ctmcked.
See chapter
"Mainte-
nance
'_
2. Stop switch
• Start the engine and
make sure that the engine
stops when the stop
switch is moved to the
stop position.
3. Hand guard
• Check that the hand
guard (D) is secured.
• Make sure the hand
guard (D) is not dam-
aged in anyway.
4. Vibration
damping
system
• Check the vibration
damping
element
regularly for material
cracks and distortion.
•
Check
that
the vibration
damping
element
is
securely
attached
between
the engine
unit
and the handlebar
unit.
D
\"\\\
6 - English
Advertisement
Table of Contents
