Table of Contents
Advertisement
14.9"(378)
E
376
F
]
24.97"(634.2)
211"(538)
:i
Fig. 1
Fig. 2
Fig. 3
Front View
Side View
Top View
I
CAUT,ON
I
The front and rear of the ice maker must be perfectly leveled. If installed on an uneven floor, and the unit is
not leveled, ice clumping may occur due to improper drainage, as the drain is not able to process the water
fast enough.
Double check that proper leveling is accomplished by placing your level in at least 4 to 6 locations (front
right, front left, center front center middle center rear for instance).
Important
Information!
If the ice maker is installed in a corner, the door handle may limit the opening of
the door.
I
CAUTION
The finished bottom should be protected during installation to avoid possible damage when moving the
product.
Important
Information!
When moving the product using a hand truck or dolly, place the dolly at the side
of the product and tape the door shut to avoid possible opening during movement.
I
Advertisement
Table of Contents
