Advertisement
Quick Links
Advertisement
Related Manuals for Hoover Convertible U4059
Summary of Contents for Hoover Convertible U4059
- Page 1 Hoover® Convertible Cleaner...
- Page 2 • Always disconnect cord from electrical outlet before servicing the cleaner. • If cleaner is in disrepair, do not attempt to operate. • Have repairs made by the qualified personnel at Hoover Factory Service Centers or Authorized Hoover Warranty Service Dealers.
-
Page 3: How To Assemble
ON-OFF SWITCH - to turn on, push switch down; to turn HANDLE cleaner off, raise the switch up CORD STORAGE HOOKS wrap cord around cord SPRING HOOK - place spring hooks for storage. ring over hook to support the bag. BAG JACKET _ outer covering NOZZLE ADJUSTMENT... - Page 4 ATTACH HANDLE TO CLEANER Unscrew nut and remove bolt and plate from handle socket. Place handle so that the holes in the bottom of the handle are directly in line with the electrical prongs and make sure the handle is positioned so that the switch is to rear of cleaner.
- Page 5 Grasp the pleats on each side of the throw- away bag at dotted line and pull out until entire dotted line is visible. Placethrow-away bag inside the outer jacket without folding and close jacket. After turning cleaner on, push down on the handle until the front of the cleaner is free from...
- Page 6 Selecting The Proper Carpet Adjustment LOW POSITION-- Select the LOW position cleaning low pile and kitchen carpeting. Notice that the nozzle of the cleaner is flush with the carpet. NORMAL POSITION -- Select NORMAL position carpeting of normal pile height. NORMAL position when...
-
Page 7: Cleaning Tool Attachments
DELUXECLEANINGSET STANDARDCLEANINGSET CLEANING TOOL ATTACHMENTS Cleaning tools are available at additional cost from Hoover Dealers. Deluxe Cleaning includes Vinyl Hose and Converter, Telescoping Extension Wand, Crevice Tool, Upholstery Nozzle, Dusting Brush and Bare Floor Brush. Standard Cleaning includes Vinyl Hose and Converter,... - Page 8 USING CLEANING TOOLS (Continued) Use the Floor Brush* for all hard floors and carpeted stairs. Use the Crevice Tool for upholstered furniture, radiators, dresser drawers and spaces between kitchen equipment. Use the Dusting Brush* for carved furniture, table tops, books, lamps, lighting fixtures, Venetian...
-
Page 9: When To Replace
NOTE: Disconnect cord before replacing parts. Your Hoover cleaner has a durable outer jacket which covers the throw- away bag. A light wiping with a damp cloth will keep this outer jacket clean. To assure that your Hoover cleaner operates... -
Page 10: Replacing The Headlight
5. Replace hood. Position furniture guard onto casting of cleaner. Tighten screws. THE BELT The belt of your Hoover cleaner controls the speed of the rug agitator and is impor- tant for the efficient operation of your cleaner. Because of this, it is important... - Page 11 WHEN REPLACE BELT Check from time to time to be Sure the belt is in good condition. If it is stretched or cut, it should be replaced. REPLACE BELT 1. Disconnect cleaner from electrical outlet before re- placing belt. 2. Turn cleaner over. move metal plate on hot- tom of cleaner by pushing latches toward...
- Page 12 5. Replaceagitator. On one end of the agitator roll there is a raised metal plate. Make sure that this end is placed in groove on side of cleaner. 6. Place belt on pulley. Side of belt nearestcleaner should be in line with arrow on bottom of cleaner.
- Page 13 THE BRUSHES When brushes are worn and bristles do not touch the edge of a card held across the nozzle, they should be replaced. Always replace both brushes at the same time to maintain cleaning efficiency. REPLACE BRUSHES 1. (Disconnect the Cleaner from Electrical...
- Page 14 Ball bearings should be checked annually and lubrication of all ball bearings should be performed by The Hoover Factory Branch Service Center or an Authorized Hoover Warranty Service Dealer, as listed on the white insert.
- Page 15 INDEX ADJUSTING CLEANER CARPET ... ASSEMBLING CLEANER ....ATTACHMENTS ......7-8-9 BELT ........ 10-11-12 BRUSHES ......... HANDLE ADJUSTMENTS ....HEADLIGHT ....... IMPORTANT SAFEGUARDS ....ORDERING PARTS ....... IO-14 SERVICE ......... THROW-AWAY BAG ..... 4-9-10...
- Page 16 Store machine carefully - in dry area - never outdoors. For optimum cleaning performance and safety, study and follow your Owner's Manual -- keep it in a handy and safe place for future reference. HOOVER COMPANY, NORTH CANTON, OHIO 44720 U4059, U4057, U4061 R2 5-75 U4063, U4037, U4039 Litho U.S.A.