Hitachi L32A403 Operating Manual page 37

Alpha series lcd flat panel hdtv
Hide thumbs Also See for L32A403:
Table of Contents

Advertisement

Available languages

Available languages

Reception
Problems
IGNITION NOISE:
Black spots or horizontal
streaks may appear, picture may flutter or drift. Usually caused
by interference
from automobile
ignition systems,
neon lamps, electrical
drills, and other
electrical appliances.
GHOSTS:
Ghosts are caused by the television signal following
two paths. One is the direct path and
the other is reflected from tall buildings, hills or some other objects. Changing the direction
or position of the antenna may improve reception. Ghosting may also be caused by defects
in the antenna system such as unshielded
leads or connecting
several sets to the same
antenna without using multiple antenna couplers.
SNOW:
If your receiver is located in the fringe area of a television station where the signal is weak,
your picture may be marred by the appearance
of small dots. When the signal is extremely
weak, it may be necessary to install a special antenna to improve the picture.
RADIO FREQUENCY
INTERFERENCE:
The interference
produces moving ripples or diagonal streaks, and in some cases, causes
loss of contrast in the picture.
PREVENTION
OF AN OBSTACLE
TO RADIO RECEIVERS
This television has been designed
pursuant to the FCC class B Rules. This is to prevent a
problem to Radio receivers.
If this television causes a problem to Radio receivers, then take
the following steps:
Keep the television away from Radio.
Adjust Radio antennas in order for the television not to receive interference.
The antenna cable of Radio should be kept away from the television.
°
Use a coaxial cable for antenna.
You can check if this television
influences Radio receivers by turning off all other equipment other than the television.
If you
find a problem receiving Radio when using the television,
check the instructions
mentioned above.
BLOCK NOISE or FREEZE (DIGITAL INPUT):
Fuzzy blocks may appear in some area or the whole area of the screen. This is usually
caused by interference from automobile ignition systems, neon lamps, electrical drills, ghost-
ing of the image and lost or weak receiving signals.
BLACK SCREEN:
When using an antenna, weak signals will display a black screen. It may be necessary to
upgrade your antenna.
The TV set can generate sound distortion in external devices such as a radio. Please separate radio equipment
from the TV set to a considerable
distance.
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L42a403

Table of Contents