GE DBLR333 Owner's Manual page 23

Hide thumbs Also See for DBLR333:
Table of Contents

Advertisement

About the control settings.
IMPORTANT: Clean the lint filter each time gou use the drger.
ge.com
H
Fabric Care/Temperature
(on some models)
REGULAR For regular to heavy cottons.
or COTTONS
REG.HEAT
MEDIUM, For synthetics, blends, delicates and items labeled permanent press.
EASYCARE
MED. HEAT,
EASYCARE
or PERMA PRESS
MED. HEAT
DELICATES On some models. For delicates, synthetics and items labeled tumble dry Io_z
LOW HEAT
FLUFF For fluffing items without
heat. Use the TIMED DRY cycle.
NO HEAT
Automatic cycles automatically determine fabric dryness. Select LESSDRYif you want your clothes
slightly damp at the end of the drying cycle. Select MOREDRYif you want them to feel drie[ Timed
cycles run for a selected time.
_
Drying
Cycles
COTTONS For cottons and most linens. For most loads, select OPTIMUMDRY (on some models) or
select the Preferred Regular Setting marked with an *.
EASY CARE/ For wrinkle-free,
permanent press and delicate items, and knits.
PERMANENT
PRESS
DEUCATES
TIMED DRY
DAMP DRY
DEWRINKLE
QUICK FLUFF
For delicate items, special-care fabrics and knits.
Set the Cgcle Selector at the desired drying time.
For leaving items partially damp.
For removing wrinkles from items that are clean and dry or that are very lightly damp.
For freshening or fluffing up alreadg dry clothing, fabrics, linens and pillows.Use with
FLUFFNO HEAT.Provides 10 minutes of no heat tumbling.
Start-Close
the dryer doo[ Select START. O pening the door during operation will stop the drye[
To restart the dryer, close the door and select STARTto complete the cycle.
Color Logic (on some models)
Select the correct FABRIC CARE setting.
Hatch the particular color below the words
with the same color on the Cycle Dial.
Example: Drying a load of clothing labeled
permanent press.
F] Choose the FABRIC CAREsetting--for
this load it would be the EASYCAREMED.
HEAT(which is a particular color).
r-_-]Turn the Cycle Dial to the area that has
the same color as the FABRIC CARE
setting gou have chosen-for this load it
would be the EASYCAREAUTOMATIQ

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents