Download Print this page

Troy-Bilt OEM-290-253 Installation Instructions Manual page 13

Bolo tine kit for horse, econo horse, pony tillers

Advertisement

Step 3. Install Tines on Left
Outer Holder
Tines used in this step:
four right-curved tines
Follow Steps 1-A through 1-D
on Page 12 to install right-
curved tines on the left outer
holder. Make sure that the tines
are installed against the outer
surface of the holder. Make sure
that all tips point inward, and all
cutting edges face forward. See
Figure 23.
Eight Right-
curved Tines
Figure 23: PONY tines installed.
Step 4: Install Tines on Right
Outer Holder
Tines used in this step:
four left-curved tines
Follow Step 2 on Page 12 to
install left-curved tines on the
right outer holder. Make sure
that the tines are installed against
the outer surface of the holder.
All tips point inward. See Figure
23 which shows PONY tines
completely installed.
Innermost Tines
Innermost Tines
Step 5: Check the Installation
This completes the installation
of the tines on your PONY
Tiller. To ensure that the
installation is correct, check for
the following:
Make sure that the tips of all
tines are pointing inward
(toward the transmission
housing).
Make sure that the cutting
edges of all tines will enter
the soil first when the
tiller is moving forward.
Also read and follow the
instructions provided in the Bolo
Tines Maintenance Section on
Page 16.
Eight Left-
curved Tines
NOTE: Shaded tines
are installed first.
13

Advertisement

loading

This manual is also suitable for:

290-253-081