Select A Patch And Play (Play Mode) - Zoom G2.1Nu Operation Manual

Select a Patch and Play (Play Mode)

1. Turn the power on
Minimize the volume of the amp.
■ When using batteries
Turn the POWER switch ON.
When using an amp, turn its power on and raise its volume.
Turn the POWER switch OFF and connect the USB connector to
HINT
a computer to operate the unit using bus power (→P29).
2. Set the unit to play mode
Turn the module selector to "PLAY."
Turn one of the parameter knobs (1–3) to open the following screen.
Bank name/
patch number
Immediately after turning the power ON, play mode is
HINT
activated regardless of the position of the module selector.
DRIVE module
distortion depth
• If you do not save changed parameters (→ P22), all changes will be lost
HINT
when you select a different patch.
• When using headphones or a mixer, we recommend that you use the direct
mode (→ P24), which simulates the sound of a guitar cabinet.
• Adjust the volume for all patches using the master level (→P30).
8
■ When using an AC adapter
Connect the AC adapter, and turn the POWER switch ON.
DRIVE module tone
Functions of
Parameter knobs 1–3
Current settings of
Parameter knobs 1–3
Patch name
Patch volume
ZOOM G2Nu/G2.1Nu