Zoom G2.1Nu Operation Manual page 36

Effect Types and Parameters
RingMod (ring modulator)
This effect produces a metallic ringing sound. Adjusting the "Freq" parameter results in a drastic change of
sound character.
PARM1
Freq (frequency)
Sets the frequency of the
modulation.
SlowATTCK (slow attack)
This effect slows the attack of each note, resulting in a violin-like performance.
PARM1
Time
Adjusts the attack time.
Octave
Adds an effect sound one octave below the unaffected sound.
PARM1
Tone
Adjusts the tone of the effect.
PedalVox
This simulates a vintage Vox wah pedal.
PedalCry
This simulates a vintage CRYBABY wah pedal.
The two effect types above have the same parameters.
PARM1
Freq (frequency)
Adjusts the emphasized
frequency. When an expression
pedal is not used, the effect is
similar to a half open pedal.
36
PARM2
1–50 Tone
Adjusts the tone.
PARM2
1–50 Curve
Set the curve of volume change
during attack.
PARM2
OctLV (octave level)
0–10
Adjusts the volume of the effect.
PARM2
1–50 DryMX (dry mix)
Adjusts the mix with the
unaffected sound.
0–10 Bal (balance)
Adjusts the balance between
original and effect sounds.
0–10 Level
Adjusts the level of the signal after
it has passed through the module.
DryLV
0 –100
(dry level)
Adjusts the volume of the
unaffected sound.
0–10 Level
Adjusts the level of the signal after
it has passed through the module.
PARM3
0–100
PARM3
2–100
PARM3
0–100
PARM3
2–100
ZOOM G2Nu/G2.1Nu