Filter Installation; Filter Removal - Sharp Plasmacluster FP-N40CX Operation Manual

PREPARATION

FILTER INSTALLATION

Be sure to remove the filters from the plastic bags before using the unit.
1

Filter Removal

1
Place the unit facing up
Place on a flat surface making sure that the
stand does not contact the surface.
2
Remove the Front Panel
Depress the tabs on the bottom
of the Front Panel and lift to re-
move.
3
Remove the Pre-Filter, Washable Ac-
tive Carbon Filter (black) and True
HEPA Filter (white) from the plastic
bags.
The Washable Active Carbon Filter is packaged
with cardboard to prevent it losing its shape.
Discard the cardboard.
Be sure to remove the power plug from the wall outlet.
Soft cloth
Tab
Washable Active Carbon Filter
E-10
Table, etc.
Front Panel
Pre-Filter