Filter Replacement Guidelines; Replacing The Filters - Sharp Plasmacluster FP-P40CX Operation Manual

FILTER REPLACEMENT GUIDELINES

The replacement period differs depending on the room environment, the
usage hours and location of Air Purifier.
If dust or odors persists, replace the filters.
(Refer to "Please read before operating your new Air Purifier")
Guide for filter replacement timing
• Filter life can be greatly reduced in poor environments.
The presence of cigarette smoke, pet dander and other concentrations of airborne particles
will cause filters to become clogged in less time. Please check filters regulary and replace as
needed.
• True HEPA Filter
• Washable Active Carbon Filter

REPLACING THE FILTERS

See page E-10,11 for directions on how
1
to install the filters when replacing.
After replacing the filters:
2
Be sure to press the Filter Reset Button on the Re-
mote Control with the power cord connected to the outlet.
A short beep will be heard and the operation hours stored
in the memory will be reset.
The CLEAN FILTER Light will then go out automatically.
Fill in the usage start date of the filters
3
on the Date Label.
Replacement Filters
Model: FZ-R45HFU
• True HEPA Filter : 1 unit
• Washable Active Carbon Filter : 1 unit
If you need a True HEPA Filter or a Washable Active Carbon
Filter only :
• True HEPA Filter : PFIL-A097KKEZ
• Washable Active Carbon Filter : PFIL-A098KKEZ
For replacement filters contact Sharp for information.
(U.S.A) 1-800-BE-SHARP or website at www.sharpusa.com
(CANADA) (905) 568-7140 or website at www.sharp.ca
Disposal of Filters
Please dispose of replaced filters according to the local disposal laws and regulations.
True HEPA Filter materials:
• Filter: Polypropylene
• Frame: Polyester
Active Carbon Filter Materials:
• Deodorizer: Activated charcoal
• Net: Polypropylene 60%, Polyester 40%
Up to 5 years after opening
Up to 5 years after opening
E-17
Date Label