Starting Bios Setup Utility - Lenovo ThinkPad X41 Tablet Troubleshooting Manual

Solving computer problems
If an error message appears while you are using the application program,
refer to the manuals supplied with the application.
On some models, the following application programs may not run
correctly. Download the latest version from the Web site listed below:
v ThinkPad 2.5 inch Hard Disk Drive Firmware Update Utility (version
v
Notes:
1. Lenovo does not guarantee the proper operation of the Drive Fitness
2. To use an additional hard disk drive, update the firmware to the latest
If the application still does not run correctly, contact your place of
purchase or a service representative for help.

Starting BIOS Setup Utility

Your computer provides a program, called BIOS Setup Utility, that enables
you to select various setup parameters.
v Config: Set the configuration of your computer.
v Date/Time: Set the date and time.
v Security: Set security features.
v Startup: Set the startup device.
v Restart: Restart the system.
Note: You can set many of these parameters more easily by using the
ThinkPad Configuration Program.
To start BIOS Setup Utility, do as follows:
1. To protect yourself against accidental loss of data, back up your data and
computer registry. For details see "Data backup-and-restore tools" in your
on-board help.
2. Remove any diskette from the diskette drive, and then turn off the
computer.
3. Turn on the computer; then, while the "To interrupt normal startup, press
the blue Access IBM button" message is displayed at the lower-left of the
screen, press the Access IBM button. The Rescue and Recovery workspace
opens.
4. Click Access BIOS. The System Restart Required window is displayed.
30
®
ThinkPad X41 Tablet Service and Troubleshooting Guide
released before January 24, 2005): The latest version is available at
http://www.lenovo.com/think/support/
Drive Fitness Test (v3.99 or earlier): The latest version is available at
http://www.hitachigst.com/hdd/support/download.htm
Test.
version.