Hitachi DZ-MV5000E Instruction Manual page 125

Message
Error occurred. Please
replace disc or format
disc.
Error occurred. Please
replace disc.
Finalize may not be
complete. Finalize again
now?
JPEG files related to
scenes are not found.
NO DISC
No more scenes.
PlayList was deleted.
PlayLists over limit.
Same scenes on Play
List will be deleted.
Delete scenes?
Scenes over limit.
Cannot add scenes.
Scenes over limit.
Cannot divide scene.
Stop processing.
There was no scene
which can be deleted.
Cause & Troubleshooting
• Abnormality has occurred with the DVD-RAM/DVD-RW/+RW
disc to be repaired. Initialise the disc before using it, or use the
another disc. Initialising the disc will erase all data on it.
• See *2 on page 126.
An abnormality occurred with a DVD-R disc to be repaired.
Replace the disc.
This message will appear when power is supplied again and the
disc is reinserted after power was shut off during finalisation due
to a power failure, etc. Choose "YES" if you wish to be sure
finalising is performed.
This message will appear when stills recorded on DVD-RAM disc
using a device other than this DVD video camera/recorder are to
be copied to card.
This message may appear when the DVD video camera/recorder
or disc is moved from a cold place to a warm place.
Condensation has occurred on the camera/recorder lens or DVD
drive. Do not remove the disc; leave the DVD video camera/
recorder turned off in a place as dry as possible for 1 – 2 hours.
The disc has not been inserted.
Insert it.
The disc is not inserted correctly.
Push the disc against the turntable at the centre until a click is
heard.
See *3 and *4 on page 127.
Is the disc surface/bottom reversed?
Check the surface/bottom of disc, and reinsert it correctly.
• All scenes are deleted from the play list.
• Since a play list with no scenes cannot be supported by
specifications, a play list from which all registered scenes have
been deselected will be deleted.
An attempt was made to create new play list or copy play list,
even though limit specified for play lists in the video recording
standard had already been stored.
• This will appear when scenes are to be deleted.
• When a play list exists on disc, an attempt to delete scenes in
programme will display this message. (This message will not
appear if you deselect scenes from play list.)
The number of scenes entered in play list has reached the limit
that can be entered.
Delete several scenes.
The number of entered scenes has reached the limit that can be
entered.
Delete several scenes.
The button was pressed to stop processing of multiple scenes.
This message will appear if you try to delete multiple scenes on
Disc Navigation when all the selected scenes have been locked.
Release the lock on scenes before executing deletion.
Reference
page
109
—
112
—
7
49
49
49, 50
105, 106
102
89
102, 106
102, 106
—
89, 96
125