Table of Contents
Advertisement
Viewing Demonstration
This DVD video camera/recorder has versatile functions, including special effects.
Before using the DVD video camera/recorder, view the demonstration to see what it can do.
Referring to step 2 on page 31, connect the DVD video camera/recorder, AC adapter and power
cable to power the DVD video camera/recorder from AC outlet.
1
Press the MENU button.
Joystick
2
Choose "Initial Setup", "Demo Mode", and
then press the
The options will appear on the right of "Demo
Mode": The
mark will be attached to the
currently selected option.
16
MENU
button
button.
3
Use the joystick to choose "Start", and then
press the
button.
The demonstration will start: View it in the
viewfinder or on the LCD screen.
To stop the demonstration midway, press the
button.
The demo mode will end when the DVD video
camera/recorder is turned off or the DISC
EJECT button is pressed down.
Note: If you choose "Auto" in step 3, the demon-
stration will automatically start approximately three
minutes after the DVD video camera/recorder is
turned on.
Note: If a disc is loaded in the DVD video cam-
era/recorder, the demonstration will not start even
if "Auto" has been set.
Note: When connecting the power cable to the
DVD video camera/recorder, the pin of power
cable cannot be completely inserted into the DC
IN 8.4V jack, but this does not indicate a malfunc-
tion. Do not insert the power cable with undue
force: Doing so could result in malfunction.
Note: The demonstration function will not work
when the DVD video camera/recorder is con-
nected to PC.
Note: While the demonstration is being given, the
recording indicator will blink.
Advertisement
Table of Contents
