Care And Maintenance; Troubleshooting Guide - Euro-Pro Shark UV610 Owner's Manual

Care and Maintenance

To improve the performance and life of your unit, we recommend you
do the following:
1. Once a month clean the unit with a dry cloth, including the chamber which
the dust container fits into. Remove any hair, fiber or other materials that
may have built up in the chamber, on the rotating brush or edging tool.
2. Don't use abrasive materials to clean the sweeper. Do not immerse the
unit in water.
3. Do not pick up liquids or use on wet floors.
4. Do not use on concrete, tar or similar rough surfaces .
5. Don't pick up pieces of string or fabrics with the sweeper.
6. Do not clean tasseled or frayed carpets with the sweeper.

TROUBLESHOOTING GUIDE

PROBLEM POSSIBLE REASON
1. Batteries discharged.
2. No power in electrical
SWEEPER WILL NOT
outlet supplying
OPERATE
transformer.
3. Unit needs servicing.
SWEEPER WILL NOT 1. Dust container is full.
PICK-UP 2. Unit needs recharging.
DUST ESCAPING
1. Dust container is full.
FROM SWEEPER
ROTATING BRUSH 1. Unit clogged.
WILL NOT PICK UP 2. Dust container is full.
1. Electrical outlet not
working
SWEEPER WILL NOT 2. Charging Adapter not
CHARGE working
3. Batteries no longer
functioning
POSSIBLE SOLUTION
1. Charge unit.
2. Check fuse or breaker.
Replace fuse/reset breaker.
3. Call Customer Service.
1. Empty dust container.
2. Charge unit.
1. Empty dust container.
1. Check for excessive material
on brush or in bottom of
sweeper. Remove obstruction
from brushes and/or sweeper.
2. Empty and clean dust
container.
1. Check to ensure outlet is
working properly. (Easily
checked by plugging in
another appliance.
2. Replace charging adapter
3. See battery disposal pg. 8.
9
Balai Motorisé Sans Fil
Modèle UV610
1. Ensemble moteur de le balai
2. Interrupteur marche/arrêt
3. Témoin de recharge
4. Vide-poussière
5. Brosse rotative
6. Couvercle de brosse transparent
7. Accessoire de nettoyage des bords
REMARQUE: Le balai motorisé sans fil modèle UV610 est
expédiée avec des piles non chargées. Charger les
piles pendant 20 heures avant d'utiliser 'appareil.
7,2 volts c.c.
8. Prise de recharge
9. Manche inférieur
10. Tubes métalliques
11. Manche supérieur
12. Adaptateur de recharge
(TechWorld AD-0920-UL
puissance nominale c.c. 9V, 200mA.)
13. Boîte à engrenages
22