Craftsman 315.101130 Operator's Manual page 3

ToolUseandCare
• Use clamps or other practical way to secure and
support the workpiece to a stable platform.
Holding the work by hand or against your body is
unstable and may lead to loss of control.
• Do not forcetool. Uso the correct tool for your
application. The correct tool will do the job better
and safer at the rate for which it is designed.
• Do not use tool if switch does not turn it on or off.
Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
• Disconnect the plug from the power source
before making any adjustments, changing accee-
sorles, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool acciden-
tally.
• Store Idle tools out of the reach of children and
other untrained persons. Tools are dangerous in
the hands of untrained users.
• Mslntatn tools wifh sere, Keep cutUng tools sherp
and clean. Properly maintained tools with sharp
cuttingedges are less likelyto bind and are easier to
control.
II1 Check for mlsallgnment or binding of moving
parts, breakage of parts, and any other condition
that may affect thetoors operation, if damaged,
have the tool son/Iced before using. Many acci-
dents are caused by poorly maintained tools,
• Use only accessories that are recommended by
the manufacturer for your model. Accessories that
may be suitable for one tool may become hazardous
when used on another tool.
SewIce
• Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualifiedpersonnel could resultin a risk of
injury.
• When servicing a tool, use only identical replace-
merit parts. Follow Instructions in the Mainte-
nance section of this manual, Use of unauthorized
parts or failure to follow Maintenance Instructions
may create a risk of electricshock or injury.