Download Print this page

Operation - Craftsman 315.116070 Owner's Manual

Palm grip finishing sander double insulated
Hide thumbs

Advertisement

OPERATION
WARNING:
Always wear safety goggles or safety glasses with side
shields when operating your sander. Failure to do so
could result in dust, shavings, loose particles or foreign
objecls being thrown into your eyes, causing possible
serious injury.
KNOW
YOUR
SANDER
Before attempting to use your sander, familiarize yourself
with all operating features and safety requirements,
See
Figure 1
SWITCH
See Figure I.
Your sander is equipped with a simple switchcontrol located
on _he front of your sander. TO turn your sander ON,
depress the switch button to the ON position as shown in
figure 1. To turn your sander OFF, depress the switch
button in the opposite direction to the OFF position.
Be sure your sander is not ON before connecting to
power supply source.
ELECTRICAL
CONNECTION
Your sander has a precision built electric motor. It should be
connected to a power supply that is 120 volts, 60 Hz, AC
only (normal household current). DOnot operate this toot
on direct current (DC). A voltage drop of more than 10
percent will cause a loss of power and the roD{or will
overheat. If your tool does not operate when plugged inlo
an outlet, double-check the power supply.
TO TURN
SANDER OFF
SWITCH
TO TURN
SANDER ON
SANDPAPER
PAPER
CLAMPLEVER
CUSHION
Fig. 1
Page 5

Advertisement

loading

  Related Manuals for Craftsman 315.116070