Download Print this page

Maintenance - Craftsman 315.116070 Owner's Manual

Palm grip finishing sander double insulated
Hide thumbs

Advertisement

MAINTENANCE
GENERAL
Only the pads s_own on ports list, page 1 t, are intended to
Oe repaired or replaced by the customer• All other parts
represent an important part of the double insulation system
and should be serviced only by a qualified Sears service
technician.
AvOid
using
solvents
when
cleaning
plastic
parts.
Most
ptasfies are
susceptible
to damage
from various
types
of
commerctal
sOlvents
and may be damaged
by their use, Use
clean
c_oths to remove
dirt, carbon
dust, efo.
d has been found that electric toots are subject to acceleratad
wear and possible premature
failure when they are used on
fiberglass
boats,
sports
ears,
wallboard,
spackling
compounds,
or piaster¸ The chips and grindings
from these
materials
are highly
abrasive
to _lectric
tool parts such
as
bearings,
brushes,
commutators,
etc. Consequently,
it is not
recommended
that this too/be
used for extended
work on
any fiberglass
material,
wallboard,
spackling compOund_,
or
plaster.
During any use on these matedafs,
it is extremely
important
that the tool is cleaned
frequently
by bl6wing
with
an air jet.
I ,_1=WARNING:
pDiOs;iOtp,
atrtanYhteyec,o,
ttabirakc_f_idaS_sgthSaO,icne
n,dPe_O,geeUr_ebaaksE
ndPrrOddeUtCtrSyp/nsettrcafing
oils, etc, come in contact wdh
EXTENSION
CORDS
The use of any extension cord willcause some loss of power.
To keep the losstoa minimumand toprevent tooloverheating,
use an extension cord that is heavy enough to carry the
current the tool will draw,
A wire gage size (A,W,G) of at _east16 is recommended for
an extension co_d 100 feet Orless in length. When working
outdoors, use an extension cord that is suitable for outdoor
use, The cord's jacket will be marked WA.
IA cA ,ON:
I
I
_IL WARNING:
1
Check extension cords before each use. If damaged J
replace immediately. Never use toot with a damaged cord
J
since touching the damaged area could cause electrical
shock resulting in serious injury,
LUBRICATION
AJJof the bearings in this toot a_e lubricated with a sufficient
amount of high grade lubricant for the life of the unit under
norma_operafing conditions Therefore, nofurt fief lubdcafion
is required.
Page
10

Advertisement

loading

  Related Manuals for Craftsman 315.116070