Slope Guide - Craftsman 536.773521 Operating Instructions Manual

SLOPE GUIDE
SIGHT AND HOLD THIS GUIDE LEVEL WITH A VERTICAL
TREE, A CORNER OF A STRUCTURE, A POWER LINE
POLE, OR A FENCE.
Operate a trimmer across the face
of slopes, never up or down slopes.
03
_t
Use this guide and do not trim on a slope greater than 15 degrees.
A 10 degree slope is a hill that increases in height at approximately 1.7 feet in 10 feet..
A 15 degree slope is a hill that increases in height at approximately 2.5 feet in 10 feet..
Use extreme care at all times and avoid sudden turns or maneuvers. Follow other instructions in this
_ manual for safety in trimming on slopes. Operate a trimmer across the face of slopes, never up or down
slopes. Use extra care when operating on or near slopes and obstructions.
oJ