SWITCH
See Figure 2.
To turn your drillON, depress the switchtdgger. To turn It
OFF, release the switch trigger,
SWITCH
TRIGGER
Fig. 2
VARIABLE SPEED
This tool has a variable speed switch that delivers higher
speed and torque with increased trigger pressure. Speed is
controlled by the amount of switch trigger depression.
Note: You might hear a whistling or dnglng noise from the
switch dudng use. Do not be concerned, this Is a normal
part of the switch function,
TWO-SPEED
GEAR
TRAIN
See Figure 3.
Your drill has a two-speed gear train designed for drilling
or driving at LO (1) or HI (2) speeds, A slide switch is
located on top of your drill to select either LO (1) or HI (2)
speed, When using drill In the LO (1) speed range, speed
will decrease and unit will have more power and torque.
When using drill In the HI (2) speed range, speed will
Increase and unit will have less power and torque. Use
LO (1) speed for high power and torque applications
and
HI (2) speed for fast ddlllng or driving applications.
TWO SPEED
GEAR TRAIN (HI-LO)
LO
SPEED
SPEED
TO INSTALL BATI'ERY PACK
RI Lockswitchtflggeronyourdrlll by placing the direction
of rotationselectorIn center position,See Figure 5.
•
Place battery peck In your drill. Align raised fib on
battery pack with groove insideddll. See Figure 4.
BATTE_
___TCHES
RELEASEBATTERYPACK
Fig, 4
•
Make sure the latches on each side of your battery
pack snap In place and battery pack is secured in drill
before beginningoperation.
A
CAUTION: When placingbattery pack In your drill,
be sure raised rib on battery pack aligns with groove
insidedrilland latches snap into place properly.
Improperassembly of battery peck can cause
damage to Internalcomponerts.
TO REMOVE BAI"FERY PACK
•
Lock switchtriggeron your ddll by placingthe direction
of rotationselector in center position. See Figure5.
•
Locate latches on side of battery pack and depress to
release battery pack from your drill. See Figure 4,
•
Remove battery pack from your dflll.
Fig. 3
11
Need help?
Do you have a question about the 315.114520 and is the answer not in the manual?
Questions and answers