Service Safety - Craftsman 172.26729 Owner's Manual

TOOL USE ANDCARE SAFETY cont.
/_ WARNING:
USEOF ACCESSORIESTHAT ARE NOT RECOMMENDED I
FOR USEWITHTHISTOOL MAYCREATEA HAZARDOUSCONDITION.
I
8. ALWAYS use only accessorles that are recommended for this tool.
Accessories that may be suitable for one tool can become hazardous when
used on another tool.
SERVICE SAFETY
I. If any part of this planer is missing or should break, bend, or fail in any
way; or should any electrlcal component fall to perform properly:
ALWAYS shut offthe power switchand remove the planer plug from the
power source and have the missing,damaged or tailed parts replaced
BEFORE resuming operation.
2. When servicing a tool, ALWAYS use only Identical replacement parts.
Follow Instructions In the maintenance section of this manual. Use of
unauthorizedparts may create a risk of electricshock or injury.
3. Tool service MUST BE performed only by a Sears Parts and Repair Center.
Service or maintenance performed by unqualifiedpersonnel could result in a
risk of injury.
ADDITIONAL RULES FOR SAFE OPERATION
,/_ WARNING:
BE SURE to read and understandall instructions. F ailure I
to follow all instructions listed below may resultin electricshock,fire and/or
I
serious personal injury.
1. Know your power tool. Read operator's manual carefully. Learn the
applications and limitations as well as the specific potential hazards
related to th s tool. Followingthis rule will reduce the nsk of electric shock,
fire or serious injury.
2. ALWAYS wear safety glasses or eye shields when using this planer.
Everyday eyeglasses have only impact-resistant lenses; they are NOT
safety glasses. Followingthis rule will reduce the risk of serious personal
injury.
3. ALWAYS protect your lungs.Wear a face mask or dust mask if the
operation is dusty. Followingthis rule will reducethe risk of serious
personal injury.
4. ALWAYS protect your hearing.Wear hearing protection during
extended periods of operation. Followingthis rule will reduce the risk of
serious personal injury.
5. ALWAYS inspect the tool cords periodically and if damaged have them
repaired at your nearest Sears Service Center or other Authorized
Service Facility. ALWAYS be aware of the cord location. Followingthis
rule will reduce the risk of electric shock or fire.