Table of Contents
Advertisement
Available languages
Available languages
These universal quick-release
mounting
brackets
are designed
for mounting
power tools on Craftsman
work stands.
MOUNTING MITER SAWS
,_
WARNING:
Failure to unplug the tool before attaching
it to the stand could
result in accidental
starting and possibly
serious personal
injury.
WARNING:
To avoid serious personal injury,always
make sure that power
tools are fully supported
and securely attached
to a level work surface.If
necessary,
move the stand to a location
where it will be more stable.
,_, WARNING:
Do not mount a table saw on this stand. The direction
of feed
on a table saw is perpendicular
the axis of stability on this stand. Aggressive
feeding of sheet materials
into a table saw could cause the stand to tip over.
Mounting
Standard
Miter Saws to Your Craftsman
Stand
(stand sold separately)
NOTICE: This configuration
allows
for miter saws on which the 4
mounting
holes form a rectangular
pattern (most miter saws).
1.
Mount your miter saw to
the quick-release
mounting
brackets (A) using the miter
saw mounting bolts (C),
washers (D), spring washers
(G) and locking nuts (H) (Fig. 2).
2.
With the miter saw securely
mounted on the quick-release
mounting
brackets,
place the
assembly onto the work stand
(sold separately)
(Fig. 3).
C
Fig. 3
Page 10
16494
ManuaLRevised_12
0522
Advertisement
Table of Contents
