Frigidaire CGES3045KB2 Use & Care Manual page 20

Built-in
Table of Contents

Advertisement

MINIMUM
AND
MAXIMUM
CONTROL
PAD
SETTINGS
All of the features listed below have minimum and maximum time or temperature
settings that may be entered into the
control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven
Lockout
pad is delayed 3 seconds).
An ENTRY ERRORtone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature,
BAKE
170°F/77°C
550°F/288°C
BROIL
400°F,1205°C
5500F,1288°C
CONVECTION
BAKE
170°F/77°C
550°F/288°C
CONVECTION
ROAST
1700F/77°C
550°F/288°C
CONVECTION
BROIL
400°F/205°C
550°F/288°C
PIZZA
170°F/77°C
5500F/288°C
CHICKEN NUGGETS
170°F/77°C
550°F/288°C
TIMER
12 Hr. Mode
0:01 Minl
11:59
Hr./Minl
24 Hr. Mode
0:01 Min.
11:59 Hr./Min.
CLOCK T!ME
12HF,
MOde
1:00 Hr,/Min,
12:59 Hr,/Min:
24 Hr. Mode
0:00 Hr./Min.
23:59 Hr./Min.
i
DELAY START
12 HF, Mode
1:00 Hr,/Min:
12:59 Hr,/Min:
24 Hr, Mode
0:00 Hr,/Min.
23:59 Hr,/Min.
BAKE TIME
12 Hr, Mode
0:01 Min: 5:59
Hr,/Min:
24 Hr. Mode
0:01 Min.
5:59 Hr,/Min.
i
SETTING
THE CLOCK
The CLOCK
pad isused to setthe clock. The clockmay
be setfor12 or 24 hour time of day operation. The clock
has been presetat the factory forthe 12 hour operation.
When the range isfirst p lugged in,or when the power
supplyto the range has been interrupted,
thetimerinthe
display will flash.
To set the clock (example below for 1:30)
1.
Press CLOCK. "CLO" will appear in the display.
2.
Press 1 3 0 pads to set the time of day to 1:30. "CLO"
will stay in the display.
3.
Press START. "CLO" will disappear and the clock will
start.
CHANGING
BETWEEN
1:2 OR 24 HOURTIHE
OF DAY
DISPLAY
1.
Press and hold CLOCKfor 6 seconds. "CLO" will appear
in the display.
2.
CONTINUEholdingthe
pad until"Z2HrdAY"or"24Hr
dAY" appears in the display and the control beeps
once.
3.
Press SELF CLEAN to switch between the 12 and 24
hour time of day display. The display will show either
"12Hr dAY" or "24Hr dAY".
.
5.
Press START toaccept thechangeor press CANCEL to
reject thechange.
Reset thecorrect t imeas described i nTo setthe Clock
above.Pleasenotethatif the24 hourtimeofday mode
was chosen,the clock will now display t imefrom 0:00
through23:59 hours.

Advertisement

Table of Contents
loading

Table of Contents