Adjusting Oven Temperature - Frigidaire Cgles389Fb5 Control Manual

Adjusting Oven Temperature
The temperature in the oven has been pre-set at the factory. When first using the oven, be
sure to follow recipe times and temperatures. If you think the oven is cooking too hot or
too cool for the temperature you select, you can adjust the actual oven temperature to be
more or less than what is displayed. Before adjusting, test a recipe by using a temperature
setting that is higher or lower than the recommended temperature. The baking results
should help you to decide how much of an adjustment is needed.
INSTRUCTIONS
To adjust the oven temperature higher
1. Press for 6 seconds. 0 ° will appear in the display (Figure 1).
2. To increase the temperature use the number pads to enter the
desired change (Example 30°F) (Figure 2). The
......... _ J
temperature may be increased by as much as 35°F (19°C).
PRESS
3. Press to accept the temperature change and the display
or
will return to the time of day (Figure 3). Press d_,_/of_ • ,A,_n,ler, to reject the
change if necessary.
//, ,
¢lear/Of_
Annulet
To adjust the oven temperature lower
1. Press for 6 seconds. 0 ° will appear in the display (Figure 4).
2. To decrease the temperature use the number pads to enter the
desired change (Example -30°F),: 0 and then nr_ dean'
p- .... Nettoyel_
\ /
(Figure 5). The temperature may be decreased by as much as
35°F (19°C).
3. Press to accept the temperature change and the display
will return to the time of day (Figure 6). Press d_._/off • _lear/Of_
_,,,,,uleri to reject the A,,,,,,10r
' / \ .........
change if necessary.
/Clean:
Nettoy_¢
or
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature or the
Broil temperature.
DISPLAY
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
To Set the Oven Control Back To The Factory Default Settings
This function allows you to reset the user defined settings back to the original settings. These include 12 or 24 Hour
Time of Day Display, Continuous Control Operation or 12 Hour Energy Saving mode, Silent Control Operation or
Normal Sounds, Fahrenheit or Celsius Temperature Display, Oven Temperature Adjustment (set back to 0).
1. Press and hold 7 until the first single beep sounds (about 6 seconds)
2. After the first beep, press pad once. All the setting are now set to the original factory default.
19