Frigidaire CRA057XT713 Use & Care Manual page 6

Operating Instructions
(continued)
TO CHANGE TEMPERATURE
SETrING:
tamp/timer
timer ON/OFF
Q
DO THIS:
PRESS ^ TO
RAISE
PRESS v TO
LOWER
YOU WILL SEE:
temp/'Umer
^
v
[] coot auto
energy saver h_ []
.fan only to
fan
mode speed
timer ON/OFF
0
Note: Tap or hold either up( A ) or down( V )
button until the desired temperature is seen on the
display. This temperature will be automatically main-
tained anywhere between 16 °C (60 °F) and 32 °C
(90 °F). If you want the display to read the actual
room temperature. See "To Operate on Fan Only"
section on Page 7.
TO AD]UST FAN SPEEDS;
DO THIS:
PRESSTO
SELECT:
TO USE AUTO FAN FEATURE;
ternp/timef
^
[] cool auto
energy saver hi
fan only Io m
DO THIS:
PRESS FAN
BUTTON
CHOOSE AUTO
fan
mode speed
timer ON/OFF
®
YOU WILL SEE:
tamp/timer
A
V
[] cool auto
enetgysaver h_
ion o_gy _o m
fan
mode speed
timer ON/OFF
®
YOU WILL SEE:
temp/Umer
^
v
m cool auto m
ene<qysaver hi
Jan only to
Fan
mode speed
timer ON/OFF
®
Note: Fan starts at High Speed and adjusts to a
slower speed as the room temperature dictates. For
example, if the room doesn't get too warm, it will
stay at the slowest speed. If the room temperature
rises quickly, such as a door being opened, it will
automatically go to the highest speed. The fan
speeds will re-adjust back to the slowest speed as
the room returns to the original set temperature.
Press either the fan slower or fan faster button to
adjust the fan speed manually.