Frigidaire FGEW2765KFA Use & Care Manual page 10

Table of Contents

Advertisement

SETTING
CONTINUOUS
BAKE OR 6 HOUR
ENERGY
SAVING
The TIMER and SELF CLEAN pads control the Continuous
Bake or 6 Hour Energy Saving features. The oven control has
a factory preset built-in 6 Hour Energy Saving feature that
will shut off the oven if the oven control is left on for more
than 6 hours. The oven can be programmed to override this
feature for Continuous Baking.
To set the control for Continuous
Bake or 6 Hour
Energy Saving features
1.
Press and hold TIMER for 6 seconds.
After 6 seconds "6Hr OFF" or "STAY On" will appear
in the display and the control will beep once.
2.
Press SELF CLEAN to switch between the 6 Hour Energy
Saving and continuous bake features.
Note: "6Hr OFF" in the display indicatesthe control isset for
the 6 Hour Energy Saving mode and"SLAY On" indicates
the control is set for the Continuous Bake feature.
3.
Press STARTLo accept the change (display will return to
time of day) or press CANCEL to reject the change.
SETTING
TEMPERATURE
DISPLAY
=
FAHRENHEIT
OR CELSIUS'
The BROIL and SELF CLEAN pads control the Fahrenheit
or Celsius temperature display modes. The oven control can
be programmed to display temperatures
in Fahrenheit or
Celsius. The oven has been preset at the factory to display
in Fahrenheit.
To change
display
from
Fahrenheit
to Celsius or
Celsius to Fahrenheit
1.
To tell if the display is set for Fahrenheit or Celsius press
BROIL and hold it for 6 seconds; "550 °,, will appear
and "BROIL"
will flash in the display and a beep will
sound. If"FAhrnht"
appears, the display is set to show
temperatures in Fahrenheit. If"CELSIUS"
appears, the
display is set to show temperatures in Celsius.
2.
Press SELF CLEAN to switch between Fahrenheit or
Celsius display modes. The display will show either
"FAhrnht"
or "CELSIUS"
3.
Press START to accept the change or press CANCEL
to reject the change.
SETTING
SILENT
CONTROL
OPERATION
The DELAY START and SELF CLEAN pads control the
Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated
without
sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned
to operating with all the normal sounds and beeps.
To change control from
normal sound operation
to
silent control operation
1.
To tell if your range is set for normal or silent operation
press and hold DELAY START." ....
"will appear and
"DELAY" will flash in the display. After 6 seconds"bEEP
On" or "bEEP OFF" will appear in the display.
2.
Press SELF CLEAN to switch between normal sound
operation and silent operation mode. The display will
show either "bEEP On" or "bEEP OFF".
Note: If"bEEP
On" appears, the control will operate with
normal sounds and beeps.
If"bEEP
OFF" appears,
the control is in the silent operation mode.
3.
Press START to accept the change or press CANCEL
to reject the change.
Note" The control will always beep at the end of a minute
timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents