Oven Temperature; Oven Light - Frigidaire CGEW3065KBB Use & Care Manual

Hide thumbs Also See for CGEW3065KBB:
Table of Contents

Advertisement

ADJUSTING
OVEN
TEMPERATURE
The temperature
in the oven has been pre-set at the
factory. When first using the oven, be sure to follow recipe
times and temperatures.
If you think the oven is cooking
too hot or too cool for the temperature
you select, you
can adjust the actual oven temperature to be more or less
than what is displayed. Before adjusting, test a recipe by
using a temperature setting that is higher or lower than the
recommended temperature. The baking results should help
you to decide how much of an adjustment is needed.
The oven temperature adjustments made with this feature
will not change the Self=Cleancycletemperature or the Broil
temperature.
To adjust the oven temperature
higher
1.
Press BAKE for 6 seconds. "UPO 0" will appear in the
display.
2.
To increasethe temperature use the number pads to enter
the desired change (Example 30°F) 30. The temperature
may be increased as much as 35°F (19°C).
3.
Press START to accept the temperature change and the
display will return to the time of day. Press CANCEL to
reject the change if necessary.
To adjust
the oven temperature
lower
1.
Press BAKE for 6 seconds. 0 ° will appear in the
display.
2.
To decrease the temperature
use the number pads to
enter the desired change (Example -30°F) 30 and then
press SELF CLEAN. The temperature may be decreased
as much as 35°F (19°C).
3.
Press START to accept the temperature change and the
display will return to the time of day, Press CANCEL to
reject the change if necessary,
OVEN LIGHT
The oven is equipped with 2 oven lights. The oven lights will
turn on automatically, when the oven door is opened.
The oven light may be turned on when the door isclosed by
using the oven light pad located on the control panel. The
oven light key will toggle the lights at full intensity.
To toggle
the Oven Lights ON and OFF:
1.
Press OVEN LIGHT _,
The interior oven lights are covered with a glass shield held
by a wire holder. The glass shield must be in place whenever
the oven is in use.
To change the interior oven lights, see "Changing the oven
light" in the Care 8=Cleaning section.
The oven temperature
adjustments
are permanent and
will stay forever in the unit memory unless you manually
change it again. Even a power outage will not reset these
changes. Follow the same procedure again if you wish to
change it to a different setting.
)i
ii!!

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents