Adjusting Oven Temperature - Frigidaire Gles388Asb Control Manual

Electronic oven control
Table of Contents

Advertisement

Oven cleaning
(continued)
To Start the Delayed
Self-Clean
Cycle
The automatic timer will turn the oven on and off at the time you select in advance. Be sure to review TO STARTTHESELF-CLEAN
CYCLE for recommended clean times.
To set the controls
for the Self-Cleaning
Cycle to start at a delayed
time
and shut off automatically:
(example 3 hour self-clean cycle to finish at 9:00)
1.
Be sure the clock is set with the correct time of day and the oven door is closed.
2.
PressCLEAN pad. "CLEAN" will flash and "3:00" (default 3 hour clean cycle) will show in the display. If a 2 or 4 hour clean
time is desired use the number pads to enter the time. Set the cleaning time based on the amount of soil you haveilight,
medium or heavy (*see To start the Self-Clean Cycle).
3.
PressSTART pad. The "DOOR LOCKED" icon will flash; "CLEAN" icon and the letters "CLn" will remain on in the display.
4.
PressSTOP TIME pad. Enter the desired Stop Time using the number pads 9 0 0.
5.
PressSTART pad. The "CLn" icon will turn off; "DELAY", "DOOR LOCKED" and "CLEAN" icons will remain on.
6.
As soon as the control is set, the motor driven oven door lock will begin to close automatically and once the door has been
locked the "DOOR LOCKED" indicator light will quit flashing and remain on. The oven icon will appear in the display.
7.
The control will calculate backward from the set stop time to determine when the self-cleaning cycle should begin. The self-
cleaning cycle will come on automatically at the calculated time. At that time, the icon "DELAY" will go out; "CLEAN" and
"CLn" will appear in the display.
When
the Self-Clean
Cycle is Completed
1.
The time of day, the "DOOR LOCKED" and "CLEAN" icon will remain in the display.
2.
Once the oven has cooled down for approximately 1 HOUR, and the icon "DOOR LOCKED" is no longer displayed, the oven
door can be opened.
Stopping
or Interrupting
a Self-Cleaning
Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:
1.
PressCLEAR OFF pad.
2.
Once the oven has cooled down for approximately 1 HOURand the "DOOR LOCKED" icon is no longer displayed, then the
oven door may be opened.
Adjusting
Oven Temperature
Note: The Oven Temperature adjustments made with this feature will not change the Self-Cleaning Cycle temperature.
The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and
temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a
recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help
you to decide how much of an adjustment is needed.
To adjust oven temperature:
1.
Push BAKE pad for 6 seconds. A beep will sound.
2.
To increase the temperature usethe number pads to enter the desire change. (Example 30°F) 3 0. The temperature may be
increased up to 35°F (17°C). Press START to accept the temperature change and the display will return to the time of day.
PressCLEAR OFF to reject the change if necessary.
3.
To decrease the temperature use the number pads to enter the desire change. (Example -30%). 3 0 and then push CLEAN
pad. The temperature may be decreased by 35°F (17°C). PressSTART to accept the temperature change and the display
will return to the time of day. Press CLEAR OFF to reject the change if necessary.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GLES388ASB and is the answer not in the manual?

This manual is also suitable for:

Ples389acbGles388asaPles389aca

Table of Contents