Table of Contents
Advertisement
Engaged wineracks
There arefive, f ulldepth
wine racks ontheupper p art
ofthecabinet tostore
wine bottIes.
The second supporting
guido (counting f rom
top-down, see
illustration marked " A')
is notsuitabme
forwine
racks. A llofthetopfive
wine racks have tabs to
engage the cabinet on both
sides. Any of the wine racks
can be removed to store
larger bottles.
To remove a rack:
1. Remove all bottles from rack.
2. Lift rack upwards and then pull out.
To replace a rack: place sides of rack back onto supporting
guides in cabinet and push racks all the way into place.
Bottle
arrangement
The top five racks each hold
eight
bottles
with the necks
alternating
front to back.
The bottom rack consists of two
stories,
each of which holds
six bottles
with
the necks
facing the front.
Interior Light
The appliance has an interior
light (max.
15W) for easy
interior visibility.
WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS
WITH NO EFFECT ON THE OPERATION OFTHE APPLIANCE.
RED WHITE
15W
MAX
COOL DOWN PERIOD
The intended temperature
range of the wine cooler is 39°F to
64°F (+/- 5°F ).
Average temperature
for red wine is 54°F to 61°R
Average temperature
for white wine is 43°F to 50°R
The display usually shows the average temperature
of the
appliance at that moment.
PRESETWINE
ZONES:
Press the [Red] or [White] pads to choose preset storage
conditions
for Red or White Wine. (The indicator 'RED' or
'WHITE' will light accordingly.)
The programmed
temperature
for red or white wine will be displayed for a few seconds.
MANUAL TEMPERATURE
SETTING:
The temperature
of the wine cooler can be set anywhere
between 39°F to 64°F by the temperature
up =& and
temperature
down _" pads as follows:
(1) Press the [SET] pad until you hear a "beep" sound
(approximately
two seconds).
(2) Press the "_- _ '_ pads to increase or decrease the desired
temperature
in increments of one degree.
(3) Press the [SET] pad to confirm your choice - if no pad is
pressed within ten seconds your choice will be
automatically
confirmed.
The ,_ indicator indicates status of the refrigeration cycle
as
follows:
(1) It remains ON during the refrigeration cycle;
(2) It remains OFF during the idle cycle.
To switch the interior
light on/off, simply press the [Light] pad.
To switch
the Appliance
on/off, simply press and hold [White]
pad for approximately
two seconds.
Advertisement
Table of Contents
