Craftsman 320.2966 Operator's Manual page 17

7. Hold the base of the tube and slowly
insert the new tube into the receptacle in
the worklight (Fig. 9). Ensure that the tube
is fully inserted into the receptacle.
8. Replace the lens and secure it with the screw
(Fig. 10).
CAUTION: To avoid serious personal
injury, always remove the battery pack from
the worklight when replacing the tube.
_, CAUTION: When replacing the tube, use
only identical replacement tubes. Use of any
other tubes may create a hazard or cause
product damage.
_, CAUTION: When replacing the tube, do
not attempt to disassemble any other parts of
the worklight in addition to the tube and lens,
which could result in possibly serious injury.
Fig. 9
Fig. 10
2966 Manual_Revised_11 0413 Page 17