Craftsman 113.247410 Owner's Manual page 35

trouble shooting -- electronics
PROBLEM
Display does not
change when blade
speed is changed.
Display changes back
and forth between
3000 & 2800 in fpm
function.
Display does not
PROBABLE CAUSE
1. Wrong display
function selected.
2. Encoder or digital
display defective.
1. Slight variations in
in blade speed.
1. Wrong display function
SUGGESTED CORRECTIVE ACTION
- Select FPM function.
- Have electronics checked by qualified
technician. Repair service available at nearest
Sears store.
- Normal.
- Select _ function.
change when blade
tension is changed.
,
selected.
Encoder or digital
display defective.
- Have electronics checked by qualified
technician. Repair service available at nearest
Sears store.
,
Display shows 1.
in tension function.
.E I
Encoder not engaged
with tab on actuator.
Blade too tight.
- Engage tab of actuator with encoder.
- Normal. Reduce blade tension.
35