Download  Print this page

Craftsman 320.27990 Operator's Manual page 3

8a impact wrench
Hide thumbs

Advertisement

The purpose
of safety symbols
is to attract
your attention
to possible
dangers.
The safety
symbols
and the explanations
with
them
deserve
your
careful
attention
and understanding.
The warnings
do not, by themselves,
eliminate
any
danger.
The instructions
and warnings
they give are no substitutes
for proper
accident
prevention
measures.
A_, WARNING:
Be sure to read and understand
all safety instructions
in this
manual, including
all safety alert symbols
such as "DANGER,"
"WARNING,"
and "CAUTION,"
before using this Impact Wrench.
Failure to follow all
instructions
listed in this manual may result in electric shock, fire, and/or serious
personal injury.
SYMBOL
MEANNING
_,
SAFETY
ALERT SYMBOL:
Indicates DANGER,
WARNING,
OR CAUTION.
May be used in conjunction
with other symbols
or pictographs.
DANGER:
Failure to obey this safety warning will result in death or serious
injury to you or to others. Always follow the safety precautions
to reduce the risk
of fire, electric shock, and personal injury.
A_, WARNING:
Failure to obey this safety warning can result in death or serious
injury to you or to others. Always follow the safety precautions
to reduce the risk
of fire, electric shock, and personal injury.
_,
CAUTION:
Failure to obey this safety warning may result in death or serious
injury to you or to others. Always follow the safety precautions
to reduce the risk
of fire, electric shock, and personal injury.
_,
WARNING:
To ensure safety and reliability,
all repairs should
be performed
at a Sears Parts & Repair Service Center.
DAMAGE
PREVENTION
AND INFORMATION
MESSAGES
These messages
inform the user of important
information
and/or instructions
that could lead to equipment
or other property
damage
if they are not followed.
Each message
is preceded
by the word "NOTE"
as in the example
below.
NOTE: Equipment and/or property damage may result if these instructions
are not followed.
_,
WARNING:
The operation
of any power tool can result in foreign objects
being thrown into your eyes, which can result in severe eye
damage.
Before beginning
power tool operation,
always
wear safety goggles or safety glasses with side shields and a
full-face shield when needed. We recommend
a Wide Vision
Safety Mask for use over eyeglasses
or standard
safety
glasses with side shields. Always
use eye protection
which is
marked to comply
with ANSI Z87.1
27990
ManuaLRevised_10
1202
Page 3

Advertisement

loading

  Related Manuals for Craftsman 320.27990