Advertisement
Available languages
Available languages
PREPARATION
HOW TO PREPARE
THE ENGINE
NOTE: The engine was shipped from the factory filled with oil.
Check the level of the oil. Add oil as needed.
Before you use the unit, read the information on safety, operation,
maintenance, and storage.
CHECK THE LEVEL OF THE MOWER HOUSING
Make
sure
the level
of cut is still correct.
After you
mow a short
distance,
look at the area that was cut. If the mower
housing
does
not cut level,
see the instructions
on "How
To Level
The Mower
Housing"
in the Service
And Adjustment
section
of this instruction
book.
CHECK THE TIRES
Check the air pressure
in the tires. Tires with too much air pressure
will cause
the unit to ride rough.
Also, the wrong
air pressure
will
keep the mower
housing
from cutting
level. The correct
air pressure
(PSI) is as follows.
Semi-pneumatic
front tires do not require
air.
Front Tires
22 PSI (1.5 BAR)
Rear Tires
14 PSI (! BAR)
IMPORTANT!
BEFORE YOU START MOWING
Check the engine oil,
Fill the fuel tank with gasoline.
Check the level of the mower housing,
Check the air pressure of the tires.
Make sure the battery cables are attached.
F-040607L
9
Advertisement
