Advertisement
Available languages
Available languages
SERVICE AND ADJUSTMENT
HOW TO INSTALL THE WHEELS
If the wheels
must
be removed
for service,
make
sure
they
are
installed
as follows.
Front Wheel
1.
Make sure the valve
etem
is to the outside
of the tractor.
Slide
the front
wheel
on the 8pindle
(See Figure 32).
2.
Fasten the front wheel with washer and cotter pin. Bend the
ends of the cotter pin apart to keep the front wheel on the
spindle.
3.
If your model has hub caps, install the hub cape. Make sure
the washers
hold the hub caps in place.
Cotter Pin
Hub Cap
\
Spindle
Valve Stem
Front Wheel
Figure 32
Rear Wheel
1.
Install
the washers
and spacer
onto
the axle
as shown
in
Figure
33.
2.
Mount
the square
key in the key slot (See Figure
33).
3.
Make sure the valve etem is to the outside of the tractor, Align
the slot in the rear wheel with the square key. Slide the rear
wheel on the axle.
4.
Fasten the rear wheel with washer and e-ring.
5.
If your model has hub caps, install the hub cape. Make sure
the washers
hold the hub caps in place.
Rear Wheel
Hub Oap
E-Ring
Valve Stem
_,
Square Key
Key Slot
Washer
I
Axle
Spacer
/
!
Figure 33
F-040607L
30
Advertisement
