Download Print this page

Craftsman 315.101211 Owner's Manual page 11

3/8 in. drill reversible double insulated

Advertisement

,_
WARNING:
Do not hold chuck body with one
hand and use the power of your drill to tighten
the chuck jaws on your drill bits. The chuck body
could slip in your hand or your hand could slip
and come in contact with a rotating drill bit. This
could cause an accident resulting in serious
personal injury.
TO INSTALL
BITS
See Figure 7.
Unplug your drill.
_1= WARNING:
Failure to unplug your drill could
result in accidental starting causing serious
injury.
Open or close the chuck jaws to a point where the
opening is slightly larger than the drill bit you intend
to use. Also, raise the front of your drill slightly to
keep the drill bit from falling out of the chuck jaws.
Insert drill bit straight into chuck the full length of
the jaws as shown ifl'figure 7.
MODELS 315.101211 AND 315.101221
CHUCK
DRILL BIT
On models 315.101211 and 315.101221 tighten
chuck jaws securely, using only the chuck key
provided.
On model 315.101231 tighten the chuck jaws on
drill bit by grasping and holding the collar of the
chuck with one hand while rotating the chuck body
with your other hand.
Note: Rotate the chuck body in the direction of the
arrow marked Lock to tighten chuck jaws.
Do not use a wrench to tighten or loosen the chuck
jaws.
On models 315.101211
and 315.101221 remove
chuck key and return to storage area.
_1= WARNING:
Make sure to insert drill bit straight
into chuck jaws. De not insert drill bit into chuck
jaws at an angle and then tighten, as shown in
figure 8. This could cause drill bit to be thrown
from drill, resulting in possible serious personal
injury or damage to the chuck.
MODELS315.101211 AND 315.101221
CHUCK
JAWS
RIGHT
WRONG
MODEL 315.101231
DRILL
CHUCK
BIT
JAWS
CHUCK
RIGHT
Fig. 7
WRONG
Fig. 8
11

Advertisement

loading

This manual is also suitable for:

315.101231315.101221