Specifications - Craftsman 315.101280 Owner's Manual

INTRODUCTION
CONGRATULATIONS AND THANK YOU FOR BUYING
THIS CRAFTSMAN 1/2 INCH DRILL. It has been
designed, engineered and manufactured to provide you with
Sears high standard of dependability, ease of operation,
and operator safety. Properly cared for, it will give you years
of rugged, trouble-free performance.
_reCarefully read this entire owner's
through
using your new drill. Pay close attention to
the Rules For Safe Operation, Warnings and Cautions. If
you use your drill properly and only for what it is intended,
you will enjoy years of safe, reliable service.
SPECIFICATIONS:
Chuck Capacity
Horsepower
Rating
No Load Speed
Switch
1/2 In.
3/8
120 Volts, 60 Hz, AC only, 3.5 AMPS
0 - 600 RPM
Adjustable Variable Speed/Reversible
Your drill has many features for making your drilling
operations more pleasant and enjoyable. Safety,
performance and dependability have been given top priority
in the design of this drill making it easy to maintain and
operate.
FULL ONE YEAR WARRANTY ON CRAFTSMAN DRILL
If this Craftsman Drill fails to give complete satisfaction within one year from the date of purchase, RETURN IT TO
THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will repair it, free of charge.
If this Craftsman Drill is used for commercial or rental purposes, this warranty applies for only 90 days from the date
of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., DEPT. 817 WA, Hoffman Estates, IL 60179
TABLE OF CONTENTS
1. Rules for Safe Operation ............................................................................ 2-3
2. Introduction and Product Specifications ........................................................ 4
3. Warranty andTable of Contents ..................................................................... 4
4 Operation .................................................................................................... 5-9
5. Maintenance and Accessories ..................................................................... 10
6. Exploded View and Parts List ................................................................. 12-13
7. Parts Ordering / Service .............................................................................. 14
The operation of any drill can result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses
with side shields, available at Sears Retail Stores.
Page 4