Assembly; Packing List - Craftsman 315.115120 Operator's Manual

KNOW YOUR CORDLESS NAILER/STAPLER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating Features and Safety Rules.
CHARGER
Your charger has a "key hole" hanging feature for conve-
nient, space saving storage. Screws should be installed
so that center distances are 4-1,/2 in. apart.
LOCK-OFF BUTTON
This tool is equipped with a "lock-off" button which
reduces the possibility of accidental starting. The lock-off
button is located on both sides of the handle above the
switch trigger. You must depress the lock-off button in
order to pull the switch trigger. The lock resets each time
the switch trigger is released.
NOTE: You can depress the lock-off button from either the
left or right side.
SWITCH TRmGGER
The switch trigger is conveniently located under the
handle. Pulling the switch trigger will fire one nail or staple
at a time.
SAFETY mNTERLOCK
The safety interlock prevents the nailer/stapler from
turning on accidentally. Push the activation foot of the
naitedstapler down flush to the workpiece to disengage
the safety interlock.
DEPTH ADJUSTMENT KNOB
Use the depth adjustment knob to control the depth of the
staple or brad nail.
UNPACKING
This product has been shipped completely assembled.
[] Carefully remove the tool and accessories from the
box. Make sure that al! items listed in the packing list
are included.
[] Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
[] Do not discard the packing material unti! you have
carefully inspected and satisfactorily operated the tool.
[] If any parts are damaged or missing, please call
1-800-932-3!88 for assistance.
PACKING MST
Nailer/Stapler
Charger
Battery Pack
1 in. Brads (100 pcs)
1/2 in. Staples (84 pcs)
Case
Operator's Manual
WARNING: If any parts are missing do not operate
the tool unti! the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.
WARNING: Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING: To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.