Download Print this page

General Maintenance - Craftsman 320.28160 Product Manual

Router table
Hide thumbs

Advertisement

GENERAL MAINTENANCE
,_ WARNING: Avoid using solvents when cleaning plastic parts. Most plastics
are susceptible to damage from various types of commercial solvents and may
be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
,_, WARNING:
Do not at any time let brake fluids, gasoline, petroleum-based
products,
penetrating
oils, etc., come in contact with plastic parts. Chemicals
can
damage, weaken or destroy plastic, which may result in serious personal injury.
,&
WARNING:
Always wear safety goggles or safety glasses with side shields
during power-tool
operation
or when blowing dust. If the operation
is dusty, also
wear a dust mask.
PROBLEM
CAUSE
The router does not
work
The table surface is
not flat
The router can not
be attached to the
table
The router is not plugged
into the table outlet.
The router-table cord is
not connected to a power
source
The Router switch is in
"OFF" position.
Legs are not properly as-
sembled.
Work surface is not flat.
Sub-base
is too large
SOLUTION
Insert router power cord
plug into a table outlet
Plug the router-table cord
into a power source
Insert key and pull the
switch to the ON position
Check assembly directions
and securely tighten all
fasteners
Place router table on a flat,
level surface
Use a sub-base 6-7/8 in. in
diameter or less.
28160
Manual_Revised_07-0228
Page 22

Advertisement

loading